CAN Coyote X7 Hardware

Supported Devices

CAN Coyote X7 supports the CAN interfaces below using the Serial Flux compatible open-source STM32F072C8 firmware protocol. Hardware is purchased separately from third-party vendors.

Classic CAN: These STM32F072C8-based devices do not support CAN FD. Support for STM32G431 and STM32G0Bx based CAN FD hardware is planned separately.

Electronics knowledge may be required: Some adapters do not expose the STM32 BOOT pin as a convenient jumper or button. Only attempt firmware installation if you understand the hardware revision you are modifying.

Flash CAN Firmware Firmware Information

Supported

FYSETC

Compatible CAN interface for CAN Coyote X7.

CAN Coyote X7 compatible
Open-source firmware available
Third-party hardware

Purchase Flash Firmware

Supported

Jhoinrch

Compatible CAN interface for CAN Coyote X7.

CAN Coyote X7 compatible
Open-source firmware available
Third-party hardware

Purchase Flash Firmware

Supported

P_CAN 0.7e

Compatible CAN interface for CAN Coyote X7.

CAN Coyote X7 compatible
Open-source firmware available
Third-party hardware

Purchase Flash Firmware

Supported

CANable V1.0 Pro

Compatible CAN interface for CAN Coyote X7.

CAN Coyote X7 compatible
Open-source firmware available
Third-party hardware

Purchase Flash Firmware

Purchase links are provided for convenience and lead to third-party sellers. Verify the exact device model and hardware revision before purchasing.

Back to CAN Coyote X7 Firmware Source on GitHub